thinkmelt@protonmail.com

mysqli

PHP/Mysql Connector TroubleShooting And Setup

In this quick review tutorial we go over establishing a back-end access to a mysql server.

python3

Installing Python3.7

This crazy short guide has a small script to install Python 3.7

phpstorm

PHPStorm TroubleShooting Guide

In this guide we go over PhpStorm step debugging a two part php file.

Docker Cookbook Recipes: nginx

Reverse SSL proxies are incredibly complex things because not only must they route packets in reverse - they must also handle and remember multiple SSL sessions for each one. Incredibly this author did an amazing job of it - and made it so simple 'a monkey could set this up!

Dockerfile Cookbook Recipes Attempt 2: moodle (Success!)

We get a functioning working moodle running inside a Docker Container that we build from near scratch!

moodle

Dockerfile Cookbook Recipes Attempt 1: moodle (failure)

In this guide we go over the first attempt at rolling your own moodle container.

Apache Superset

Dockerfile Cookbook Recipes Part 03: apache / php

The goal is to always make these guides very simple - but to build from there, and to always try to include debugging information. Prerequisites: If you need a quick startup script for installing docker / docker-ce: 0x0002 - New VM Docker / Docker-Compose Quick StartNew VM Docker / Docker-Compose Quick StartTechnical Blogthinkmeltapache

docker

Dockerfile Cookbook Recipes Part 02: mysql

In this basic example we take a good strong look at building and rolling your own mysql containers with various options and a good guide on how it all works!

rpi-2040

Rpi-2040 Getting Accurate Timers and SYS_TICK

In this quick guide we go over getting the Raspberry pi Pico as accurate as we can by accessing its own SYS_TICK timer..

clion

Clion Raspberry Pi-Pico REPL Walk-through over USB - Then Use it to Control a Variable Frequency PWM Square-Wave Oscillator Generator!

In this guide we write a command controllable square-wave generator capable of controlled accurate PWM to 400KHz!

cups

ParrotSec Setting Up CUPS Network Printing

In this simple quick guide we go over setting up a CUPS system service then adding a local network printer.

clion step-debugging

Simulating Hardware Interrupts for Clion Step-Debugging for the Raspberry-Pi Pico

In this quick short tutorial we go over artificially clocking your chip to continue to enable step-debugging.

Harmonics

Arm Products Walk-through For Setting Up ILabs Lora Rpi2040 Board w/Clion IDE

In this guide we fuddle through a ILabs Clion setup for their Lora 868 Mhz Long Range board and point out some of the hurdles and improvements that would help!

micropython

Micro-Python / Repl Setup W/Pycharm in a Linux Envirnoment

In this quick guide we go over setting up the Repl Enviroment for Pycharm for quick little one-off programs on your edge MCU's

clion

Clion Raspberry Pi Pico Pro-Tips while Debugging...

In this short guide we go over some attention to details required when step-debugging the raspberry pi-pico!

clion

CLion Support for Step-Debugging w/ Raspberry Pi-Pico

In this guide we get stepper-debugging to work for the Raspberry Pi Pico with a $25 CMSIS probe!

raspberry pi pico

10 Tips For Raspberry Pi-Pico Coding

In this guide we go over 10 power tips for getting yourself going programming the raspberry pi-pico ecosystem. It can be very challenging when you leave the 'pin flipping' python basics!

eclipse

Setting up an actual Working Eclipse IDE for Raspberry Pi-Pico Development with OpenOCD

We *actually really* get Eclipse to work with OpenOCD and a Raspberry Pi-Pico for rapid development.

rpi2040

Raspbery Pi-Pico / Pico-Probe Testing and Work ups Part II

In this Part II guide we start learning the bells and whistles of a pico-probe being used in the OpenOCD environment.

rpi-2040

Raspbery Pi-Pico Conversion to a Pico-Probe Part 1

This simple guide goes over programming your raspberry pi into a pico-probe with hopefully CMSIS-DAP support!

rpi2040

Setting up Raspberry Pi Pico to Play Nice w/Clion

In this guide we go over getting an almost stepping debugger to work for Clion breaking free of the pico-examples and actually getting your own stand-alone project to work!

RPi2040 C Code Interrupt Example

An Interrupt is just that - an interrupt of a running program to handle an event (mouse click, keyboard, video, hard drive - etc.) Interrupts actually have a long history. You can read about the history of the interrupt for the PC DOS from many years ago. DOS API -

Android

Coding Android Applications Simplified (And Why Many Give Up).

In this tutorial we go over the basics of getting over the pitfalls of learning the Android application environment.

cron

crontab time-to-run utility

Thus fun small script will give you a nice eye-candy log of your time-to-next-run on each line of your crontab!

Android

No Way! Run Ubuntu Inside Termux inside a Unrooted Android Phone..

In this crazy rabbit-hole for funsies we install Ubuntu inside Termix inside the JRE of the controlled Android Google phone!